Bealls Florida Packaging & Routing Guidelines
Bealls Florida Packaging Guidelines: Learn pallet stacking, carton dimensions, label placement, and SKUs/POs rules for compliant shipping.
These answers are generated by our compliance AI and have not been vetted by a human. Take caution if using this information in your packing flows.
Can I stack pallets?
Can you mix multiple SKUs per carton?
Can you mix multiple SKUs per pallet?
Can you mix POs in a single carton?
Can you mix POs in a single pallet?
What are the max dimensions and weights for cartons?
The requirements specify that the minimum carton dimensions are 9" x 6" x 3". There is no minimum weight requirement provided; the documents only state a maximum weight of 50 lbs for cartons.
Where do I place the label on a carton?
Where do I place the label on a pallet?
Below you will find a common list of FAQs that our users have when it comes to packaging guidelines for Bealls Florida.
Can I stack pallets?
Yes, as long as they are double-stackable unless otherwise noted. For example, the guidelines state that all pallets must have the ability to be double stacked.
Can you mix multiple SKUs per carton?
It depends on the ship-to and method. For example, the DA shipping instructions (and DC shipments) state “Do not mix SKUs,” while the Dermstore instructions (page 6) specify a “Mixed Carton Label” and allow mixing SKUs if items are separated by SKU.
Can you mix multiple SKUs per pallet?
It depends on the specific shipping instructions. For example, the DA shipping guidelines require that you do not mix SKUs (1 SKU per pallet), while for Amazon orders mixed SKUs are permitted provided each SKU is separated with paper and properly labeled.
Can you mix POs in a single carton?
No. Each PO must be packed in separate cartons; you cannot combine POs in the same carton.
Can you mix POs in a single pallet?
No, you cannot mix POs on a single pallet.
What are the max dimensions and weights for cartons?
Cartons may not exceed dimensions of 35½" L x 23" W x 22" H and may not weigh more than 50 lbs.
What are the min dimensions and weights for cartons?
The requirements specify that the minimum carton dimensions are 9" x 6" x 3". There is no minimum weight requirement provided; the documents only state a maximum weight of 50 lbs for cartons.
Where do I place the label on a carton?
For UCC128 labels (required on all store cross‐dock shipments), place the label on either the longest or the shortest side of the carton – it must be positioned 1¼ inches from the natural bottom and ¼ inch from the side, and it must not be placed on the top. The sample labels (4"x6" and 3"x8") are designed with specific information zones, but no additional carton placement instructions are provided for them.
Where do I place the label on a pallet?
For standard pallet orders, a pallet label is to be placed on both the front and back of each pallet. In orders with partial cartons, a “PARTIAL” sticker must be placed on the top of the pallet. For truck or line‐order shipments, the shipping label should be attached to carrier sheets and then applied to the front and back of each pallet, and in some carton orders pallet sheets are required on all four sides.
QUESTIONS
Don't see the answer you need?
Fill out the form below, and our team will demonstrate how RetailerHub AI provides real-time answers to your questions.